peadf

Guide

How to convert a PDF to SVG for Silhouette Studio

Silhouette Studio opens SVG files, but only in Designer Edition and above: the free Basic Edition does not. If your edition does, a PDF pattern or template can be turned into an SVG of real cut lines in your browser, at the size it was drawn. Here is how, and what to check before you cut.

Updated

Convert PDF to SVG

Free, in your browser, with no sign-up and no watermark.

Open PDF to SVG

Check your edition of Silhouette Studio first

Silhouette's own support pages say Studio can open SVG files in Designer Edition or above. The free Basic Edition cannot, so an SVG will not help there until you upgrade. The paid editions may also open a PDF directly, which is worth trying first. Converting to SVG is the better route when you want one size of a layered pattern, when the PDF brings in pictures or lettering you do not want, or when it arrives at the wrong size.

Convert the PDF to SVG in your browser

The PDF to SVG tool writes the PDF's own lines as SVG paths. It runs in your browser, so the file is not uploaded.

  1. 1

    Add the PDF and keep Cutting machine selected

    Drop the file into the tool. Cutting machine writes plain paths only, with any text turned into outlines.

  2. 2

    Choose your size and your pages

    If the pattern has layers, leave only your size ticked. Type page numbers to skip the instruction pages.

  3. 3

    Convert and download

    Press Convert to SVG. One page comes as an .svg, several as a .zip with one SVG for each page.

Open the SVG in Silhouette Studio

  1. 1

    Open the file

    Open the .svg from the File menu, or drag it onto the mat. If the download was a .zip, unzip it first.

  2. 2

    Check the size

    Measure a length you know, such as the pattern's test square. Silhouette says an SVG keeps its size at 72 DPI, and that is the scale this file is written at.

  3. 3

    Check the cut lines

    Look at the Send panel before you cut. If the pieces show no cut lines, select them and turn cutting on.

If it does not look right

  • The SVG will not open: your edition is probably Basic. SVG needs Designer Edition or above.
  • The tool says there are no lines to convert: the PDF is a scan. A picture has nothing in it to cut along.
  • Everything moves as one block: ungroup it to move, delete or recolour single pieces.
  • Labels are in the way: convert again with Include text unticked.

Questions people ask

Can the free Basic Edition of Silhouette Studio open an SVG?

No. Silhouette's support pages say SVG files open in Designer Edition or above. Basic Edition opens other formats, such as DXF, which this tool does not make. If you often cut from patterns you buy, the edition upgrade is what unlocks SVG.

Will my pattern be the right size in Silhouette Studio?

It should be. The SVG is written at the exact size of the PDF page with 72 units to the inch, and Silhouette's guidance is that an SVG keeps its size at 72 DPI. Still, measure the test square on the mat before you cut: it takes a few seconds and saves fabric.

Do I need the SVG at all if Studio can open my PDF?

Not always. If your edition opens the PDF and the pieces come in clean and at the right size, use that. The SVG is worth making when you want one size out of a layered pattern, only some of the pages, or the lettering left out.

Is my pattern uploaded when I convert it?

No. The conversion runs in your browser, so the PDF never leaves your device. It is free, with no sign-up and no watermark.

Tools for this job

Read next